{"product_id":"samlex-dc-2000-kit-inverter","title":"Samlex DC-2000-KIT Inverter","description":"\u003ch2\u003eSamlex DC Inverter Installation Kit With 200A Fuse\u003c\/h2\u003e\n\u003cp\u003eThe Samlex DC Inverter installation kit supports safe, low-loss DC wiring for inverter systems. It includes a 200A fuse assembly and two 10-foot AWG 2 cables. This kit helps connect a battery bank to an inverter with proper overcurrent protection. Use it for mobile power, backup power, and off-grid electrical projects.\u003c\/p\u003e\n\u003cp\u003eThis clearance kit is intended for DC side connections only. It does not convert power by itself. It helps complete a DC connection path that an inverter needs. It can reduce voltage drop when cable sizing is correct. It also protects wiring during fault conditions by limiting damage.\u003c\/p\u003e\n\u003ch3\u003eProduct Features of Samlex DC Inverter Kit\u003c\/h3\u003e\n\u003cp\u003eThis kit combines key DC connection parts in one package. It includes a fuse assembly rated at 200 amps. It also includes matched positive and negative cables. Each cable is 10 feet long, AWG 2 size. These features ensure safe and reliable inverter connections.\u003c\/p\u003e\n\u003cp\u003eIt supports cleaner layouts in battery compartments. The kit simplifies parts selection for installers. It also supports consistent conductor sizing on both legs. The fuse assembly supports safer operation when faults occur and helps limit damage from short circuits.\u003c\/p\u003e\n\u003cp\u003eRelated terms include battery bank, overcurrent protection, and off-grid power. These terms align with inverter installation planning. Cable routing and strain relief remain important. Terminal torque values should match the connector type. Heat and vibration must be considered in mobile installs.\u003c\/p\u003e\n\u003ch3\u003eHow This Inverter Installation Kit Works\u003c\/h3\u003e\n\u003cp\u003eDC battery power converts into usable AC power. The inverter draws high current on the DC side. That current flows through cables to the inverter terminals. Proper cable gauge reduces voltage drop. Lower voltage drop supports stable inverter performance.\u003c\/p\u003e\n\u003cp\u003eThe fuse assembly installs on the positive DC conductor near the battery source. This placement protects the cable run. If a short occurs, the fuse opens the circuit. That reduces fire risk along the wiring path.\u003c\/p\u003e\n\u003cp\u003eThis kit supports the DC-side path. The cables carry current between the battery and inverter safely. The fuse assembly provides a defined protection point. It does not replace a disconnect switch. Add a battery disconnect as required. Follow local code guidance for installation.\u003c\/p\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cp\u003eUse this kit for RV and van electrical systems. It fits marine battery compartments with proper sealing. It also works in off-grid cabins with battery storage. It supports backup power systems with inverters and is useful for work trucks with onboard AC loads.\u003c\/p\u003e\n\u003cp\u003eA \u003ca href=\"https:\/\/www.portlandiaelectric.supply\/products\/samlex-dc-2000-kit-inverter\" target=\"_self\" title=\"\"\u003eSamlex DC Inverter\u003c\/a\u003e is common in solar plus storage setups. The DC cables connect battery storage to the inverter. Charge controllers feed the battery bank. The inverter supplies AC loads. Proper fusing supports safer system operation and reduces faults.\u003c\/p\u003e\n\u003cp\u003eConsider cable length and routing before installation. Ten-foot cables may require trimming or rerouting. Keep cable runs as short as practical. Avoid sharp bends and abrasion points. Use grommets where cables pass through metal.\u003c\/p\u003e\n\u003cp\u003eUse appropriate lugs for AWG 2 conductors. Verify lug hole size matches your inverter studs. Confirm polarity before energizing the system. Label cables for maintenance clarity. Inspect connections after initial load testing.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003eSome specifications are not published for this kit. No datasheet was provided for verification. Dimensions and weight can vary by production batch. Use the table values for planning only. Confirm fitment before final installation.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eSamlex\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMPN\u003c\/td\u003e\n\u003ctd\u003eDC-2000-KIT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eInverter installation kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncluded Fuse Assembly\u003c\/td\u003e\n\u003ctd\u003e200A fuse assembly (fuse included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncluded Positive Cable\u003c\/td\u003e\n\u003ctd\u003e10 ft, AWG 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncluded Negative Cable\u003c\/td\u003e\n\u003ctd\u003e10 ft, AWG 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor Size\u003c\/td\u003e\n\u003ctd\u003e2 AWG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Length\u003c\/td\u003e\n\u003ctd\u003e10 ft each (positive and negative)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKit Dimensions (L x W x H) in\u003c\/td\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKit Weight (lbs)\u003c\/td\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDatasheet\u003c\/td\u003e\n\u003ctd\u003eNot available\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eFor compatible inverter wiring and protection parts, see our internal collection. Visit \u003ca href=\"https:\/\/portlandiaelectricsupply.com\/collections\/inverters\" target=\"_blank\" rel=\"noopener\"\u003ePortlandia Electric Supply inverters collection\u003c\/a\u003e. It helps compare related DC cabling items. It also helps locate installation accessories.\u003c\/p\u003e\n\u003cp\u003eTo research additional public references, use this outbound search. Try \u003ca href=\"https:\/\/www.google.com\/search?q=Samlex+DC+2000+KIT+200A+fuse+AWG+2+10+ft\" target=\"_blank\" rel=\"noopener\"\u003eGoogle results for the kit parts\u003c\/a\u003e. Compare photos and listings for fitment clues. Confirm details with your system requirements.\u003c\/p\u003e\n\u003cp\u003eThe Samlex DC Inverter installation kit is best used with correct system planning. Confirm your inverter input current and surge needs. Match fuse rating to inverter guidance and conductor capacity. Keep the fuse near the battery positive terminal. Use protective loom in high abrasion areas.\u003c\/p\u003e\n\u003cp\u003eMeasure the full cable run, including bends and service loops. If your run is longer, voltage drop can increase. If drop is high, consider heavier gauge cable. Also consider parallel conductors when needed. Always verify crimp quality and insulation integrity.\u003c\/p\u003e\n\u003cp\u003eBefore connecting a Samlex DC Inverter, disconnect all power sources. Remove jewelry when working near battery terminals. Use insulated tools when possible. Torque connections to manufacturer guidance. Recheck torque after initial thermal cycling.\u003c\/p\u003e\n\u003cp\u003eThis kit supports DC-side best practices for many inverter systems. It provides a fuse point and matched cables. It does not replace grounding requirements. It does not include AC wiring parts. Add system labeling and documentation for safe servicing.\u003c\/p\u003e\n\u003cp\u003eIf you use a Samlex DC Inverter in a solar storage system, coordinate with the charge controller. Ensure the battery chemistry matches charging profiles. Verify ventilation requirements for the battery location. Keep cables away from heat sources. Use clamps to prevent vibration wear.\u003c\/p\u003e\n\u003cp\u003eFor marine use, consider corrosion control measures. Use sealed terminals when possible. Apply appropriate anti-corrosion coatings. Ensure the fuse holder location stays dry. Follow marine electrical standards for routing and support.\u003c\/p\u003e\n\u003cp\u003eFor vehicle installs, protect cables through bulkheads. Use grommets and strain relief. Avoid routing near fuel lines. Keep cables away from sharp edges. Add a disconnect switch for service isolation.\u003c\/p\u003e\n\u003cp\u003eFor worksite power, verify inverter and load compatibility. Motor loads can create high surge currents. Confirm fuse selection supports that profile. Keep spare fuses available. Inspect cables periodically for abrasion or heat damage.\u003c\/p\u003e\n\u003cp\u003eThe Samlex DC Inverter kit can help standardize your wiring approach. It can also reduce time spent sourcing separate parts. Still confirm lug sizes and termination types. Confirm battery terminal spacing and access. Plan for safe service clearance around the fuse assembly.\u003c\/p\u003e\n\u003cp\u003eWhen replacing parts, match fuse type and rating. Do not upsize a fuse without engineering review. Oversized fuses can reduce protection. Undersized fuses can nuisance trip. Balance protection with expected load behavior.\u003c\/p\u003e\n\u003cp\u003eDocument the final as-built layout for future work. Label the fuse rating at the battery. Label polarity at inverter terminals. Keep a copy of wiring diagrams. These steps support safer troubleshooting later.\u003c\/p\u003e\n\u003cp\u003eThe system performance depends on clean DC delivery. Good connections reduce heat and losses. Correct fusing reduces hazard severity. Proper routing prevents insulation wear. Combine these practices for dependable off-grid power.\u003c\/p\u003e\n\u003cp\u003eSamlex DC Inverter installations benefit from routine checks. Look for discoloration at terminals. Check for loose fasteners. Inspect for cable jacket damage. Replace worn parts before failures occur.\u003c\/p\u003e","brand":"Samlex","offers":[{"title":"Default Title","offer_id":42993181950086,"sku":"P_Test_2025-1","price":70.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/5188\/6982\/files\/DC-2000-KIT-1.jpg?v=1765900819","url":"https:\/\/www.portlandiaelectric.supply\/products\/samlex-dc-2000-kit-inverter","provider":"Portlandia Electric Supply","version":"1.0","type":"link"}