Square D HOMT202025 Circuit Breaker for 120/240V Branch Protection
The Square D HOMT202025 Circuit is a miniature circuit breaker for branch circuit protection. It fits common residential load centers and similar panels. It helps protect conductors from overloads and short circuits. This overview explains features, operation, and typical uses. It also lists key specifications for planning and replacement.
Product Features
The Square D HOMT202025 Circuit uses a compact, bolt-on style design. It is intended for reliable installation in compatible Square D panels. It supports 120/240V AC circuits in many common layouts. It is rated for 20A continuous branch protection. It is designed for standard wire and device coordination. It helps reduce fault energy through fast interruption behavior.
The Square D HOMT202025 Circuit is often chosen for maintenance replacements. It can support lighting, receptacles, and small appliance circuits. It can also support dedicated loads within its amp rating. It is commonly used with copper conductors in indoor panels. Verify conductor size, temperature rating, and code requirements first.
Related terms include load center, panelboard, overcurrent protection, thermal-magnetic trip, and short-circuit protection. These terms describe common breaker functions and system roles. Always match the breaker to the panel label and listing. Follow NEC and local code guidance during selection.
How Square D HOMT202025 Circuit Works
The Square D HOMT202025 Circuit uses two trip elements for protection. A thermal element responds to sustained overload current. It warms and triggers a trip after a time delay. This delay can help tolerate normal inrush conditions.
A magnetic element responds to high fault current. It trips quickly during short circuits. This fast response helps limit conductor heating and damage. It also supports safer fault clearing in panel environments.
The Square D HOMT202025 Circuit opens the circuit when tripped. It can then be reset after the fault is corrected. Do not repeatedly reset without finding the cause. Common causes include overloaded circuits and wiring faults. Equipment issues can also create recurring trips.
Applications
The Square D HOMT202025 Circuit is used in residential and light commercial distribution. It is commonly used for 120V branch circuits in homes. It is also used for 240V circuits with two-pole configurations. Confirm pole count and panel compatibility before installation.
Typical uses include general receptacle circuits and lighting circuits. It can serve small HVAC controls and similar loads. It can also protect garage outlets and workshop circuits. It may support kitchen circuits when properly designed. Always confirm load calculations and required dedicated circuits.
The Square D HOMT202025 Circuit can be used in retrofit service work. It is also used in new work where listed compatibility exists. Use proper torque values on terminals and lugs. Use correct wire stripping length and conductor type. Verify neutral and ground separation per the panel role.
Specifications
Use these specifications to confirm fit and electrical match. Some physical data is not available without a datasheet. Dimensions and weight are listed as N/A when not verified. Confirm exact values from a trusted source before final submittal.
| Brand |
Square D |
| MPN |
HOMT2020250 |
| Product Type |
Circuit Breaker |
| Series / Family |
HOM (Homeline) |
| Rated Voltage |
120/240V AC |
| Rated Current |
20A |
| Trip Type |
Thermal-magnetic |
| Mounting Style |
Bolt-on (verify with panel listing) |
| Interrupt Rating (AIC) |
N/A |
| Number of Poles |
N/A |
| Terminal Type |
N/A |
| Conductor Material |
Copper or aluminum (panel and breaker listing dependent) |
| Operating Temperature |
N/A |
| Certifications |
N/A |
| Dimensions (L x W x H) in |
N/A x N/A x N/A |
| Weight (lbs) |
N/A |
For compatible breakers and related gear, review the Portlandia Electric Supply collections. Use this internal resource for category browsing and cross-references. View PES circuit breaker collection.
For additional references, compare listings and images using a broader query. Use the exact part string for better results. Search Google for HOMT2020250 details.
Selection notes matter for safety and compliance. The Square D HOMT202025 Circuit must match the panel’s approved breaker list. The Square D HOMT202025 Circuit should match voltage, poles, and AIC needs. The Square D HOMT202025 Circuit should match the conductor size and insulation rating. The Square D HOMT202025 Circuit should be installed by qualified personnel. The Square D HOMT202025 Circuit should follow torque and labeling requirements.
Before ordering, confirm the original breaker type and mounting method. Confirm handle tie needs for multi-wire branch circuits. Confirm GFCI or AFCI requirements in the circuit location. Confirm available fault current at the panel. This helps determine proper interrupt ratings. If unsure, consult the panel documentation or an electrician.
In service troubleshooting, first check the connected load. Reduce loads to see if trips stop. Inspect receptacles and wiring for heat damage. Check for loose terminations and neutral issues. Use a meter only when trained and equipped. Document findings before restoring full load.