Get yours today!
In the last 7 days
Get it between Mon, Sep 22 - Wed, Sep 24
Unlimited lifetime support, always available.
Get yours today!
In the last 7 days
Get it between Mon, Sep 22 - Wed, Sep 24
Unlimited lifetime support, always available.
Couldn't load pickup availability
In High Demand! Order Now To Secure Your Items
Get yours today!
In the last 7 days
Get it between Mon, Sep 22 - Wed, Sep 24
Unlimited lifetime support, always available.

The Samlex DC Inverter installation kit supports safer inverter wiring in mobile power systems. It includes a 100A fuse assembly and two 10-foot AWG 4 cables. The kit helps reduce voltage drop on higher current runs and supports clean battery-to-inverter connections. Use it for RV, marine, and off-grid battery banks. This clearance kit focuses on core protection parts, not marketing extras.
This kit includes a 100A fuse assembly with the fuse installed. It also contains a 10 ft AWG 4 positive cable and a 10 ft AWG 4 negative cable. These components match many 12V and 24V DC setups. Cable gauge selection affects heat and voltage drop. AWG 4 is common for mid-range inverter installs.
The fuse assembly adds overcurrent protection near the battery connection. This protection limits damage from short circuits and helps protect inverter input wiring. Fuse-based protection is a standard best practice that many installers follow. Most place the fuse on the positive lead within a short battery distance.
The cables are pre-sized for common layouts. Ten feet supports flexible routing in vehicles and cabins. Correct polarity cabling simplifies installation checks. Clear labeling remains important during final termination. Use proper lugs and torque values for terminals. Verify torque using the inverter and lug specifications.
Semantically related terms such as overcurrent protection, battery cables, and fuse block match typical planning for inverter wiring. These terms also align with safety and compliance discussions. Always follow local electrical codes for DC circuits. Use strain reliefs and abrasion protection where needed.
A DC Inverter converts DC battery power into usable AC power. It takes energy from a battery bank and creates an AC waveform for connected loads. This supports tools, appliances, and electronics. Output characteristics depend on the inverter model. Always confirm voltage and wattage requirements.
This kit supports the DC side of an inverter installation. The battery cables carry high current at low voltage. Low voltage requires thicker conductors to reduce resistive losses. Reduced losses support cooler operation and steadier voltage under load.
The fuse assembly helps manage fault conditions. A short circuit can cause extreme current, and the fuse opens during excessive current. This limits wire overheating risks and reduces battery discharge during faults. Always match fuse rating to system design.
Installers typically connect the positive cable through the fuse assembly. The negative cable runs directly to the battery negative terminal. Some systems use a shunt for monitoring. If used, it’s placed on the negative path. Follow monitor manufacturer guidance and confirm polarity before energizing.
The kit fits many mobile power builds. RV power systems often need robust DC cabling. Marine electrical systems benefit from proper fusing. Off-grid cabins use inverters for intermittent AC power. Work trucks use inverters for tools and charging. Each use case requires safe cable routing.
Solar-charged battery banks frequently pair with inverters. The kit supports inverter battery connections but does not replace solar charge controller wiring or AC distribution parts. It focuses on the inverter DC feed path. Confirm your system current before choosing cable size.
This installation kit can be used in backup power setups with batteries. It helps during planned maintenance outages and supports small loads during short interruptions. Always calculate expected runtime realistically, considering battery chemistry and temperature effects.
For collection browsing, use this internal link: Portlandia Electric Supply inverter collection. It helps compare related inverter accessories and review compatible installation items. Use model ratings to confirm fit and plan ventilation and clearance around inverters.
For broader research, use this outbound search link: Google search for Samlex DC Inverter DC-1000-KIT. It surfaces third-party listings, user photos, and typical mounting approaches. Cross-check claims with safe wiring standards and prefer manufacturer guidance when available.
Specifications for this installation kit are limited without a datasheet. Values below reflect provided product details. Dimensions and weight are not published in available information. Record actual measurements before shipping or enclosure planning. Verify fuse type and mounting pattern during installation.
| Specification | Value |
|---|---|
| Brand | Samlex |
| MPN | DC-1000-KIT |
| Product Type | Inverter Installation Kit |
| Included Fuse Assembly | 100A fuse assembly (includes fuse) |
| Positive Cable | 10 ft, AWG #4 |
| Negative Cable | 10 ft, AWG #4 |
| Cable Length Units | Feet |
| Dimensions (L x W x H) in | N/A |
| Weight lbs | N/A |
| Datasheet | No datasheet available |
| Condition Note | Clearance |
When sizing the installation kit, confirm continuous and surge current. Check battery-to-inverter distance and routing. Confirm conductor temperature rating and insulation type. Verify terminal compatibility with lugs and studs. Use heat shrink and abrasion protection. Add grommets where cables pass through metal.
For best results, keep DC runs short. Keep bends smooth and supported. Avoid sharp edges and high heat zones. Maintain separation from fuel lines if possible. Label cables for polarity and service. Re-check torque after initial use cycles.
If expansion is needed, consider adding a DC disconnect, shunt-based battery monitor, cable clamps, or loom. Also consider spare fuses of the same type. These items support maintainability, safety, and faster fault isolation.
The Samlex DC Inverter installation kit is a practical starting point. It covers core cabling and fuse protection. It supports many inverter wiring layouts. It does not replace full system design. Treat it as part of a complete DC power system plan.
Returns are free in the first 30 days with no restocking or processing fees, although the customer may be responsible for paying return shipping. See our complete return policy on our Shipping, Delivery, and Returns page linked in the footer of this website.
Our returns policy covers all purchases made through Portlandia Electric Supply. For warranty issues, as authorized distributors, we honor the full manufacturer warranty of ALL the brands on our website. See our complete returns and warranty policies on our Shipping, Deliver, and Returns page.
All orders are processed within 72 hours and you can expect delivery on most orders within 5-7 business days. You will receive access to our customer portal after ordering, where it is easy to track all your shipments. See our Shipping, Delivery and Returns page for more details.
We offer several ways to pay to make getting your solar kit simple:
Credit Card: if the purchase is greater than your card’s limit, you can split the cost onto multiple cards as well as Paypal, financing through Affirm, and ACH/bank transfer
You can arrange financing during the checkout process, or scroll further down this page for more details. Please note, if you'd like to finance your order, you can do so instantly, right at checkout.
Our legendary lifetime customer support has helped make us the #1 online solar retailer! We have a dedicated team of solar professionals standing by to help you navigate the world of solar with ease. From selecting the perfect solar kit to installation and beyond, we provide support and expertise at every step of the journey.If you need help with ordering, shipping, troubleshooting, expanding your system, warranty issues, or anything else you have questions about for as long as you own your Portlandia Electric Supply equipment, we’ve got you covered: we’re always only a phone call or email away.
The Samlex DC Inverter installation kit supports safer inverter wiring in mobile power systems. It includes a 100A fuse assembly and two 10-foot AWG 4 cables. The kit helps reduce voltage drop on higher current runs and supports clean battery-to-inverter connections. Use it for RV, marine, and off-grid battery banks. This clearance kit focuses on core protection parts, not marketing extras.
This kit includes a 100A fuse assembly with the fuse installed. It also contains a 10 ft AWG 4 positive cable and a 10 ft AWG 4 negative cable. These components match many 12V and 24V DC setups. Cable gauge selection affects heat and voltage drop. AWG 4 is common for mid-range inverter installs.
The fuse assembly adds overcurrent protection near the battery connection. This protection limits damage from short circuits and helps protect inverter input wiring. Fuse-based protection is a standard best practice that many installers follow. Most place the fuse on the positive lead within a short battery distance.
The cables are pre-sized for common layouts. Ten feet supports flexible routing in vehicles and cabins. Correct polarity cabling simplifies installation checks. Clear labeling remains important during final termination. Use proper lugs and torque values for terminals. Verify torque using the inverter and lug specifications.
Semantically related terms such as overcurrent protection, battery cables, and fuse block match typical planning for inverter wiring. These terms also align with safety and compliance discussions. Always follow local electrical codes for DC circuits. Use strain reliefs and abrasion protection where needed.
A DC Inverter converts DC battery power into usable AC power. It takes energy from a battery bank and creates an AC waveform for connected loads. This supports tools, appliances, and electronics. Output characteristics depend on the inverter model. Always confirm voltage and wattage requirements.
This kit supports the DC side of an inverter installation. The battery cables carry high current at low voltage. Low voltage requires thicker conductors to reduce resistive losses. Reduced losses support cooler operation and steadier voltage under load.
The fuse assembly helps manage fault conditions. A short circuit can cause extreme current, and the fuse opens during excessive current. This limits wire overheating risks and reduces battery discharge during faults. Always match fuse rating to system design.
Installers typically connect the positive cable through the fuse assembly. The negative cable runs directly to the battery negative terminal. Some systems use a shunt for monitoring. If used, it’s placed on the negative path. Follow monitor manufacturer guidance and confirm polarity before energizing.
The kit fits many mobile power builds. RV power systems often need robust DC cabling. Marine electrical systems benefit from proper fusing. Off-grid cabins use inverters for intermittent AC power. Work trucks use inverters for tools and charging. Each use case requires safe cable routing.
Solar-charged battery banks frequently pair with inverters. The kit supports inverter battery connections but does not replace solar charge controller wiring or AC distribution parts. It focuses on the inverter DC feed path. Confirm your system current before choosing cable size.
This installation kit can be used in backup power setups with batteries. It helps during planned maintenance outages and supports small loads during short interruptions. Always calculate expected runtime realistically, considering battery chemistry and temperature effects.
For collection browsing, use this internal link: Portlandia Electric Supply inverter collection. It helps compare related inverter accessories and review compatible installation items. Use model ratings to confirm fit and plan ventilation and clearance around inverters.
For broader research, use this outbound search link: Google search for Samlex DC Inverter DC-1000-KIT. It surfaces third-party listings, user photos, and typical mounting approaches. Cross-check claims with safe wiring standards and prefer manufacturer guidance when available.
Specifications for this installation kit are limited without a datasheet. Values below reflect provided product details. Dimensions and weight are not published in available information. Record actual measurements before shipping or enclosure planning. Verify fuse type and mounting pattern during installation.
| Specification | Value |
|---|---|
| Brand | Samlex |
| MPN | DC-1000-KIT |
| Product Type | Inverter Installation Kit |
| Included Fuse Assembly | 100A fuse assembly (includes fuse) |
| Positive Cable | 10 ft, AWG #4 |
| Negative Cable | 10 ft, AWG #4 |
| Cable Length Units | Feet |
| Dimensions (L x W x H) in | N/A |
| Weight lbs | N/A |
| Datasheet | No datasheet available |
| Condition Note | Clearance |
When sizing the installation kit, confirm continuous and surge current. Check battery-to-inverter distance and routing. Confirm conductor temperature rating and insulation type. Verify terminal compatibility with lugs and studs. Use heat shrink and abrasion protection. Add grommets where cables pass through metal.
For best results, keep DC runs short. Keep bends smooth and supported. Avoid sharp edges and high heat zones. Maintain separation from fuel lines if possible. Label cables for polarity and service. Re-check torque after initial use cycles.
If expansion is needed, consider adding a DC disconnect, shunt-based battery monitor, cable clamps, or loom. Also consider spare fuses of the same type. These items support maintainability, safety, and faster fault isolation.
The Samlex DC Inverter installation kit is a practical starting point. It covers core cabling and fuse protection. It supports many inverter wiring layouts. It does not replace full system design. Treat it as part of a complete DC power system plan.
Returns are free in the first 30 days with no restocking or processing fees, although the customer may be responsible for paying return shipping. See our complete return policy on our Shipping, Delivery, and Returns page linked in the footer of this website.
Our returns policy covers all purchases made through Portlandia Electric Supply. For warranty issues, as authorized distributors, we honor the full manufacturer warranty of ALL the brands on our website. See our complete returns and warranty policies on our Shipping, Deliver, and Returns page.
All orders are processed within 72 hours and you can expect delivery on most orders within 5-7 business days. You will receive access to our customer portal after ordering, where it is easy to track all your shipments. See our Shipping, Delivery and Returns page for more details.
We offer several ways to pay to make getting your solar kit simple:
Credit Card: if the purchase is greater than your card’s limit, you can split the cost onto multiple cards as well as Paypal, financing through Affirm, and ACH/bank transfer
You can arrange financing during the checkout process, or scroll further down this page for more details. Please note, if you'd like to finance your order, you can do so instantly, right at checkout.
Our legendary lifetime customer support has helped make us the #1 online solar retailer! We have a dedicated team of solar professionals standing by to help you navigate the world of solar with ease. From selecting the perfect solar kit to installation and beyond, we provide support and expertise at every step of the journey.If you need help with ordering, shipping, troubleshooting, expanding your system, warranty issues, or anything else you have questions about for as long as you own your Portlandia Electric Supply equipment, we’ve got you covered: we’re always only a phone call or email away.
Got a question? We are here to answer
From hurricanes to blackouts, reliable solar power ensures you're able to keep your home & family safe no matter what comes your way.
Making one-click solar solutions simple since 2018. Whether you’re powering a cabin, charging devices, or backing up your home.
Say goodbye to reliance on the energy companies. Enjoy the same freedom that 50,000+ customers have with their own solar power system.
Troy P
This is the first stage of my three planned purches. I got the eg4 inverter 6000 XP base kit with six 400 watt panels and the two server rack batteries. Did a little online research and followed the instructions and it got set up without any issues. Right now I'm just running it in my garage on a single outlet and have been running dual 750 watt water distillers with it. Once I get the second inverter and a bunch more panels and batteries, I plan on attaching it to my subpanel in my house that has my lights and outlets and appliances on it. Then I'll get a soft start for my AC and blower and run it on my main panel.
Jacob B
Trying to pick the correct solar system for your needs can be very technical and frustrating. I wanted to thank Yvhan and the Portlandia Electric supply team for their patience and helpful attitudes through multiple calls. I feel like we were able to narrow it down to what worked for me and my family. My system works great and I couldn't be happier to have picked Portlandia Electric Supply.
Patrick B
I wanted to get an offgrid solar system for years but didn’t know where to start. I found Portlandia Electric Supply on Facebook and decided to submit a quote. Within 24 hours I had a custom proposal that was almost half the price of the companies I had previously got quotes from. My wife and I decided to order online and the kit came in a timely manner and it was an easy install. Great company to work with!
James Martin
I would like to take the time to express the outstanding service that I was provided with by Portlandia Electric Supply. They provided me with all the answers to my questions, and after reviewing our quote over the phone I felt comfortable proceeding to order my kit. It’s exactly what I needed and they were there to help us over the phone when we had questions installing it. I highly recommend others in need to choose Portlandia Electric Supply.
Brian H
As a professional videographer, I needed reliable power on the go.Portlandia Electric Supply Delta Pro and roof-mounted panels were the perfect solution. Setup was easy, and the kit included everything needed. The Delta Pro powers my cameras, lights, laptop, and a small fridge with impressive battery capacity.
Keith S
You folks have been wonderful guiding me through the ins and outs of going solar. Plus your tech guys Rod and Nelson are the absolute best. They explained all the different aspects of inverters, batteries and how to keep them in top condition. Too much more to put here… but no other company has the 100% tech support you provide for your customers!
Coll A
My experience with Portlandia Electric Supply has been excellent. Before the sales, they answered all my questions to assure that I got what I needed. After the sales they continued to support me with answers and help. I had a warranty issue with a unit, and it was handled as well as possible. I would recommend them to anyone looking to go solar.
Troy P
This is the first stage of my three planned purches. I got the eg4 inverter 6000 XP base kit with six 400 watt panels and the two server rack batteries. Did a little online research and followed the instructions and it got set up without any issues. Right now I'm just running it in my garage on a single outlet and have been running dual 750 watt water distillers with it. Once I get the second inverter and a bunch more panels and batteries, I plan on attaching it to my subpanel in my house that has my lights and outlets and appliances on it. Then I'll get a soft start for my AC and blower and run it on my main panel.
Jacob B
Trying to pick the correct solar system for your needs can be very technical and frustrating. I wanted to thank Yvhan and the Portlandia Electric supply team for their patience and helpful attitudes through multiple calls. I feel like we were able to narrow it down to what worked for me and my family. My system works great and I couldn't be happier to have picked Portlandia Electric Supply.
Patrick B
I wanted to get an offgrid solar system for years but didn’t know where to start. I found Portlandia Electric Supply on Facebook and decided to submit a quote. Within 24 hours I had a custom proposal that was almost half the price of the companies I had previously got quotes from. My wife and I decided to order online and the kit came in a timely manner and it was an easy install. Great company to work with!
James Martin
I would like to take the time to express the outstanding service that I was provided with by Portlandia Electric Supply. They provided me with all the answers to my questions, and after reviewing our quote over the phone I felt comfortable proceeding to order my kit. It’s exactly what I needed and they were there to help us over the phone when we had questions installing it. I highly recommend others in need to choose Portlandia Electric Supply.
Brian H
As a professional videographer, I needed reliable power on the go.Portlandia Electric Supply Delta Pro and roof-mounted panels were the perfect solution. Setup was easy, and the kit included everything needed. The Delta Pro powers my cameras, lights, laptop, and a small fridge with impressive battery capacity.
Keith S
You folks have been wonderful guiding me through the ins and outs of going solar. Plus your tech guys Rod and Nelson are the absolute best. They explained all the different aspects of inverters, batteries and how to keep them in top condition. Too much more to put here… but no other company has the 100% tech support you provide for your customers!
Coll A
My experience with Portlandia Electric Supply has been excellent. Before the sales, they answered all my questions to assure that I got what I needed. After the sales they continued to support me with answers and help. I had a warranty issue with a unit, and it was handled as well as possible. I would recommend them to anyone looking to go solar.
Shop Securely, Trusted Supplier, 100% Satisfaction
Trusted Company, Real Products, Lifetime Support
Avoid Scams, Buy with Confidence, Enjoy Peace of Mind
Manufacturer Warranty, Exceptional Service
Shop Securely, Trusted Supplier, 100% Satisfaction
Trusted Company, Real Products, Lifetime Support
Avoid Scams, Buy with Confidence, Enjoy Peace of Mind
Manufacturer Warranty, Exceptional Service
Shop Securely, Trusted Supplier, 100% Satisfaction
Trusted Company, Real Products, Lifetime Support
Avoid Scams, Buy with Confidence, Enjoy Peace of Mind
Manufacturer Warranty, Exceptional Service
Shop Securely, Trusted Supplier, 100% Satisfaction
Trusted Company, Real Products, Lifetime Support
Avoid Scams, Buy with Confidence, Enjoy Peace of Mind
Manufacturer Warranty, Exceptional Service
Shop Securely, Trusted Supplier, 100% Satisfaction
Trusted Company, Real Products, Lifetime Support
Avoid Scams, Buy with Confidence, Enjoy Peace of Mind
Manufacturer Warranty, Exceptional Service
Shop Securely, Trusted Supplier, 100% Satisfaction
Trusted Company, Real Products, Lifetime Support
Avoid Scams, Buy with Confidence, Enjoy Peace of Mind
Manufacturer Warranty, Exceptional Service
Shop Securely, Trusted Supplier, 100% Satisfaction
Trusted Company, Real Products, Lifetime Support
Avoid Scams, Buy with Confidence, Enjoy Peace of Mind
Manufacturer Warranty, Exceptional Service
Shop Securely, Trusted Supplier, 100% Satisfaction
Trusted Company, Real Products, Lifetime Support
Avoid Scams, Buy with Confidence, Enjoy Peace of Mind
Manufacturer Warranty, Exceptional Service
Shop Securely, Trusted Supplier, 100% Satisfaction
Trusted Company, Real Products, Lifetime Support
Avoid Scams, Buy with Confidence, Enjoy Peace of Mind
Manufacturer Warranty, Exceptional Service
Shop Securely, Trusted Supplier, 100% Satisfaction
Trusted Company, Real Products, Lifetime Support
Avoid Scams, Buy with Confidence, Enjoy Peace of Mind
Manufacturer Warranty, Exceptional Service
When you choose Portlandia Electric Supply, you’re buying real products from a trusted company with established supplier relationships. Enjoy peace of mind with 100% manufacturer warranty coverage and lifetime customer support. In an age where online shopping is fraught with risks, it’s crucial to avoid fly-by-night websites that skirt regulations. Shop with confidence, knowing you’re getting genuine quality and reliable service.
$150 Value - Free Offer (Limited Time Only!) No Strings Attached. Totally Free. Takes Less than 2 Minutes.
Got a question? We are here to answer