Get yours today!
In the last 7 days
Delivery timeframe shown above at checkout
Unlimited lifetime support, always available.

The Victron Energy MultiPlus Inverter Charger combines a powerful true sine wave inverter with an adaptive battery charger in one compact unit. Model PMP242200102 delivers 2000VA continuous output from a 24V DC battery bank. This Victron MultiPlus features PowerAssist technology and a 50A transfer switch for seamless power management. It serves RVs, marine vessels, off-grid homes, and backup power installations with reliable performance.
The inverter produces clean 120V AC power at 60Hz with less than 2% voltage deviation. Continuous output reaches 1600W at room temperature with 1400W at 40°C ambient. Peak power handling reaches 3500W for starting motors and high-inrush loads. This clean waveform safely powers sensitive electronics including computers and medical equipment.
The 50A battery charger uses intelligent adaptive charging software for optimal battery health. Four charging stages include bulk, absorption, float, and storage modes. The charger automatically adjusts output based on battery condition and temperature. A secondary trickle charge output maintains starter batteries on marine and RV installations.
PowerAssist prevents generator and shore power overloads during high-demand periods. The Victron MultiPlus supplements limited AC input with battery power when loads exceed source capacity. This feature allows smaller generators to handle temporary peak demands efficiently. When demand decreases, excess power recharges the battery bank automatically.
The integrated 50A transfer switch provides under 20 milliseconds switchover time. Computers and sensitive electronics continue operating without interruption during grid failures. The unit seamlessly transitions between shore power, generator, and inverter modes. This no-break functionality protects critical loads during power source transitions.
Connect up to six MultiPlus units in parallel for increased power capacity. Three units configure for three-phase AC output in commercial applications. VE.Bus communication enables synchronized operation across multiple inverters. This scalability supports system expansion as power requirements grow over time.
The unit monitors AC input and battery voltage continuously during operation. When shore or generator power is available, the charger maintains battery state of charge. During AC failure, the inverter instantly provides power from the battery bank. PowerControl limits charging current to prevent overloading limited AC sources.
VE.Bus ports connect to Cerbo GX or other monitoring devices for system control. The VRM online portal displays operational data and enables remote configuration access. The VictronConnect app provides smartphone monitoring and setting adjustments via Bluetooth. DIP switches allow basic on-site configuration without additional equipment.
The Victron MultiPlus includes comprehensive protection circuits for safe operation. Overload and short circuit protection safeguards connected equipment and the inverter itself. High and low battery voltage cutoffs prevent battery damage during extended use. Temperature monitoring reduces output power automatically when internal temperatures rise excessively.
Marine installations benefit from the corrosion-resistant design and compact enclosure. RV owners appreciate the quiet operation and efficient battery charging during travel. Off-grid solar systems pair perfectly with the adaptive charging profiles. Backup power installations rely on the fast transfer switch for critical load protection.
| Specification | Value |
|---|---|
| Model Number | PMP242200102 |
| Input Voltage Range | 19 - 33V DC |
| Output Voltage | 120V AC ± 2% |
| Output Frequency | 60Hz ± 0.1% |
| Continuous Output (VA) | 2000 VA |
| Continuous Output (W) | 1600W at 25°C |
| Continuous Output at 40°C | 1400W |
| Peak Power | 3500W |
| Maximum Efficiency | 94% |
| Zero-Load Power | 11W |
| Charger Current | 50A |
| Transfer Switch Rating | 50A |
| AC Input Voltage Range | 95 - 140V AC |
| Charge Voltage (Absorption) | 28.8V |
| Charge Voltage (Float) | 27.6V |
| Transfer Time | <20 milliseconds |
| Dimensions (H×W×D) | 19.9 x 9.3 x 5.8 inches |
| Weight | 34.2 lbs |
| Operating Temperature | -40°F to 149°F |
| Certifications | UL Approved, VE.Bus |
Explore our complete selection of inverter chargers at Inverter Chargers. Find compatible battery monitors and accessories in our Victron Energy collection. Browse solar charge controllers in our Charge Controllers category.
For complete technical documentation and configuration guides, visit Victron Energy Official Website.
From hurricanes to blackouts, reliable solar power ensures you're able to keep your home & family safe no matter what comes your way.
Making one-click solar solutions simple since 2018. Whether you’re powering a cabin, charging devices, or backing up your home.
Say goodbye to reliance on the energy companies. Enjoy the same freedom that 50,000+ customers have with their own solar power system.
$150 Value - Free Offer (Limited Time Only!) No Strings Attached. Totally Free. Takes Less than 2 Minutes.