Get yours today!
In the last 7 days
Delivery timeframe shown above at checkout
Unlimited lifetime support, always available.

L14-30 Twist-Lock Male & Female | L14-50 Straight-Blade Plug | 6-Gauge Rubber | 12,500W @ 240V | 50A
Important: Always refer to your generator owner's manual to confirm the correct part number and plug configuration before purchase. Do not rely solely on product images to determine compatibility. Incorrect cord selection may result in equipment damage or safety hazards.
This Generac 25-foot generator power cord is built for heavy-duty residential and jobsite use, connecting your generator to a transfer switch, power inlet box, or other 240V load center. Constructed with 6-gauge rubber-jacketed conductor wire, it supports up to 12,500 watts at 240V and is rated for 50 amps — making it suitable for large standby and portable generators. The cord features NEMA L14-30 4-prong twist-lock male and female connectors for a secure, vibration-resistant connection, along with a NEMA L14-50 straight-blade generator plug that connects to generators equipped with straight-blade (L14-50) outlets. The flexible rubber jacket maintains pliability in cold outdoor conditions and resists abrasion, oil, and UV exposure for long service life.
Heavy-Gauge 6 AWG Wire — Up to 12,500W: 6-gauge copper conductors handle up to 12,500 watts of continuous load at 240V with minimal voltage drop across the full 25-foot run — sized for large portable or standby generators operating at or near full capacity.
L14-30 Twist-Lock Security: NEMA L14-30 locking male and female connectors twist and lock into place, preventing accidental disconnection from vibration or cord tension during extended generator operation — a critical safety feature for outdoor and jobsite use.
L14-50 Straight-Blade Generator Plug: The 50-amp straight-blade (L14-50) generator-end plug connects directly to generators equipped with straight-blade outlets, eliminating the need for adapters and providing a clean, direct connection to the power source.
Flexible Rubber Jacket Construction: The rubber outer jacket remains flexible in cold weather conditions, resists cracking, abrasion, oil, and UV degradation — making this cord well-suited for permanent outdoor installation or repeated seasonal use.
25-Foot Reach for Flexible Placement: The 25-foot length provides sufficient distance to position your generator safely away from doors, windows, and vents as required by code, while still reaching your home's power inlet box or transfer switch without extension.
This cord serves as the physical power link between a portable generator and your home's power inlet box or manual transfer switch. The L14-50 straight-blade plug connects to the generator's outlet, and the L14-30 twist-lock female end connects to the power inlet box mounted on your home's exterior. Once connected and the transfer switch is engaged, generator power flows through the cord into the home's electrical panel to supply selected circuits.
Generator-End Connection (L14-50 Plug): The straight-blade L14-50 50A plug inserts directly into the generator's receptacle outlet. Always ensure the generator is off and in a safe state before making or breaking this connection.
Load-End Connection (L14-30 Twist-Lock): The NEMA L14-30 female twist-lock connector at the load end secures to your power inlet box or transfer switch receptacle. Align the prongs, insert, and rotate to lock — creating a firm, pull-resistant connection that won't loosen under vibration.
Safe Generator Placement: The 25-foot cord length allows the generator to be placed at a safe distance from the home in compliance with NFPA and local codes requiring a minimum 20-foot clearance from openings — never operate a generator indoors or in an attached garage.
| Manufacturer | Generac |
| Product Type | Generator Power Cord |
| Cord Length | 25 feet |
| Wire Gauge | 6 AWG |
| Amperage Rating | 50 Amps |
| Max Wattage Capacity | 12,500 W @ 240V |
| Voltage Rating | 125/250 Vac |
| Generator-End Plug | NEMA L14-50 — 50A Straight-Blade, 4-Prong |
| Load-End Connectors | NEMA L14-30 — 30A 4-Prong Twist-Lock Male & Female |
| Jacket Material | Rubber (Flexible, Cold-Weather Rated) |
| Conductor Material | Copper |
| Number of Conductors | 4 (2 Hot, 1 Neutral, 1 Ground) |
| Intended Use | Generator to Power Inlet Box / Transfer Switch |
Electrical Standards: UL Listed | CSA Certified | NEMA Configuration Compliant
Installation Code: NEC Article 702 (Optional Standby) | NFPA 37 Generator Placement Requirements
Safety Warning: Never operate a generator indoors, in a garage, or near windows or vents. Maintain minimum 20-ft clearance from home openings per NFPA guidelines.
Compatibility Note: Always verify the correct plug configuration in your generator's owner's manual before purchase. Do not rely solely on product images for compatibility.
● Available | Contact us for lead time and pricing
From hurricanes to blackouts, reliable solar power ensures you're able to keep your home & family safe no matter what comes your way.
Making one-click solar solutions simple since 2018. Whether you’re powering a cabin, charging devices, or backing up your home.
Say goodbye to reliance on the energy companies. Enjoy the same freedom that 50,000+ customers have with their own solar power system.
$150 Value - Free Offer (Limited Time Only!) No Strings Attached. Totally Free. Takes Less than 2 Minutes.